站在光学测量技术的最前沿  

       芬兰Noptel公司中国办事处             

RAILTRACER轨道平直度测量仪（轨道校准测量系统）

 特征：

RAILTRACER是一种用于轨道机械方面的测量系统。它被开发主要用于压型机，测量其轨道与标准轨道线的校准情况。它也被用在起重机、轻轨电车测量导轨垂直与水平的位置。

系统应用PSM-200激光位置测量仪器。该仪器通过固定在直接接触导轨的轨道车上的接收器测量导轨垂直和水平位置。该系统可以安装在很多种类的机械上而不需要额外的自动控制。

该系统可以在轨道修复时使用，或者在测量轨道位置以便计划下一步操作或者检查工作后的结果时使用。

发射器发射的激光束在给定方向上可以是固定的也可以是可以扫描的。

操作者可以在计算机在监视直线导轨的直线性，在两个方向上都以图形的形势给出。操作者还可以设定提高量（lifting）,校准量（alignment）和水平量(levelling)，并按需要在数字文件中储存测量数据。

测量仪器：

PSM-200测量仪器专用于测量工作机械的位置。本仪器由激光发射器和与目的物连接在一起的光电子接收器组成。操作者指引出一条安全、可见的激光束打在接收器上并将其定在固定位置。接收器识别光靶上的光束并以每秒100次的计算精度测量它的位置.                                     

仪器的优秀的环境适应能力主要取决于激光束的正确调制和接收器应用的光学技术和探测技术，这些技术能消除在很广的测量范围内光线、温度、雾、雨、雪等对精度的影响。激光发射器与接收器之间的距离范围为1-350m，这主要取决于环境条件。

RAILTRACER的特性：

•导轨横截面垂直和水平方向的测量值

•在计算机存储器上以数据文件形式存储测量数据

•在计算机监视器上以图形形式显示测量结果，图形以距离为x轴以横截面y轴

•通过功能键操作

•多语言支持

•易操作

应用：

压型机测量

起重机导轨测量

焊接点的测量

导轨截面的测量

导轨表面粗糙度的测量

Railtracer

System for measuring the alignment of rails

Railway track
Crane rails
Conveyor belts
Trajectories of robots
Work machines
Vehicles

Characteristics

RAILTRACER is a measurement system for rail machinery. It has been especially developed for use with tamping machines for measuring the alignment of rails in accordance with specific guidelines, but it is also used with coaches, cranes and lightweight trolleys to measure the vertical and horizontal position of the rails.

The system employs the PSM-200 laser position measurement device to access the position of the rail in the horizontal and vertical planes using a receiver connected to a part of the vehicle, which is in direct contact with the rail. The system can be installed to many types of machinery and does not require additional automation.

The system can be used during the rehabilitation operation or to measure the rail position in order to plan operations in advance or inspect the result of the work afterwards.The laser beam of the transmitter can either be fixed or sweep over the receiver area in a given direction.

A PC allows the operator to monitor the straightness of the line rail graphically in both directions, set values for lifting, alignment and levelling and store measurement data in a numerical file as required.

Measurement device

The PSM-200 measuring device has been developed especially for measuring the position of a working machine. It is based on a laser transmitter and an optoelectronic receiver connected to the object. The operator directs a safe, visible laser beam at the receiver and locks it in a steady position. The receiver recognises the beam on the optical target and measures its position accurately up to 100 times a second.

The very good environmental durability of the equipment is achieved mainly by proper modulation of the laser beam and optics and the detection technology employed in the receiver, which will eliminate the influence of sunlight, temperature, fog, rain, snow etc. on the accuracy over a wide measurement range. The transmitter can be at a distance up to 350 metres from the receiver, depending on the environmental conditions.

Railtracer features

Measurement of the profile of the rail in a horizontal and vertical direction
Storing of measurement data as a data file in the PC memory
Graphical presentation of measurement results on the PC monitor as a distance based profile of the rail
Operated through the function keys
Multi-language support
Easy to handle and operate

Installation versions

Measurement with distance based operation using Railtracer software or time based operation using PSM-software. System measures the alignment of the line rail at front bogie and gives the operator information about the position of the rail for the performing of control operations.

Applications

Measurement device for tamping machines
Measurement of crane rails
Measurement of welded joints
Measurement of rail profile
Measurement of rail surface roughness

京ICP备06067095号